General

dc-potential range

± 5 V or ± 10 V

compliance voltage

± 10 V

maximum current

± 30 mA (typical)

max. acquisition rate

150,000 data points/s

Potentiostat (controlled potential mode)

applied dc-potential resolution

75 μV

applied potential accuracy.

≤ 0.1% ± 1 mV offset

current ranges

100 pA to 10 mA (9 ranges)

current accuracy

≤ 0.1 % (at Full Scale Range)

measured current resolution

0.006 % of current range (5 fA on 100 pA range)

Galvanostat (controlled current mode)

current ranges

1 nA to 10 mA (8 ranges)

applied dc-current range

± 6 times applied current range

applied dc-current resolution

0.005 % of applied current range

measured dc-potential accuracy

75 μV at ± 10 V
7.5 μV at ± 1 V
0.75 μV at ± 0.1 V

FRA / EIS (impedance measurements)

frequency range

10 μHz to 1 MHz (or 10 μHz to 100 kHz)

ac-amplitude range

1 mV to 0.25 V rms, or 0.6 V p-p

Electrometer

electrometer amplifier input

> 1 TΩ // 10 pF

bandwidth

1 MHz

Auxiliary port (D-Sub 15)

analog input

± 10 V, 18 bit

analog output

0-10 V, 12 bit (1 kOhm output impedance)

4 digital outputs

0-3.3 V

1 digital input

0-3.3 V (5 V tolerant))

I-out and E-out

raw output of current and potential
E-out ± 10 V (1 kOhm output impedance)
I-out ± 6 V (1 kOhm output impedance)

power

5 V output (max. 150 mA)

Instrument

housing 

15 x 25 x 25 cm ³

weight

+/- 4 kg

temperature range

0 ºC ~ + 50 ºC

power supply

external 12 V AC/DC adapter

communication

USB

internal storage space

8 GB per channel
or +/- 800000 measurements incl. method info (assuming 200 data points per measurement)