취급품목
Gateway to Electrochemistry
Gateway to Electrochemistry
MultiTrace 의 소프트웨어는 채널 별로 개별 측정 또는 동시 측정이 가능하며 각 채널에서 일련의 자동화된 작업의 실행이 가능합니다.
각 채널은 주변 기기를 제어하거나 온도 또는 기타 아날로그 신호를 모니터링 하기위한 보조 포트를 추가로 제공합니다.
각 채널은 다음과 같이 구성할 수 있습니다.
MultiPalmSens4에는 각 채널별로 8GB의 내부 저장 장치가 장착되어 있습니다.
즉, 모든 측정이 백업으로 자동 저장 될 수 있습니다.
측정된 데이터는 MultiTrace 소프트웨어를 사용하여 쉽게 검색하여 PC로 전송할 수 있습니다.
1 EIS, MultiStep 및 MixedMode 테크닉에서는 지원되지 않습니다.
MultiPalmSens4에서 지원되는 테크닉은 다음과 같습니다.
이 method 들은 모두 trace analysis에 적용되는 stripping modes에 사용될 수 있습니다.
고정 주파수 또는 주파수 스캔으로 스캔 할 수 있습니다.
General | |
dc-potential range | ± 5 V or ± 10 V |
compliance voltage | ± 10 V |
maximum current | ± 30 mA (typical) |
max. acquisition rate | 150,000 data points/s |
Potentiostat (controlled potential mode) | |
applied dc-potential resolution | 76.3 μV (18-bit) |
applied potential accuracy. | ≤ 0.1% ± 1 mV offset |
current ranges | 100 pA to 10 mA (9 ranges) |
current accuracy | < 0.2% of current |
measured current resolution | 0.005% of current range |
Galvanostat (controlled current mode) | |
current ranges | 1 nA to 10 mA (8 ranges) |
applied dc-current range | ±6 x applied current range |
applied dc-current resolution | 0.0076% of applied range (<10 mA) |
applied dc-current accuracy | < 0.2% of current |
potential ranges | 10 mV, 100 mV, 1 V |
measured dc-potential resolution | 78 μV at ±10 V (1 V range, 18-bit) |
measured dc-potential accuracy | ≤ 0.05% or ±1 mV for |E| <9 V |
FRA / EIS (impedance measurements) | |
frequency range | 10 μHz to 100 kHz or 10 μHz to 1 MHz |
ac-amplitude range | 1 mV to 0.25 V rms, or 0.7 V p-p |
GEIS (galvanostatic impedance measurements) | |
frequency range | 10 μHz to 100 kHz |
ac-amplitude range | 0.001 * CR to 0.4 * CR rms (<10 mA) |
Electrometer | |
electrometer amplifier input | > 1 TΩ // 10 pF |
bandwidth | 1 MHz |
Auxiliary port (D-Sub 15) | |
analog input | ± 10 V, 18 bit |
analog output | 0-10 V, 12 bit (1 kOhm output impedance) |
digital I/O | 4x digital output (5 V) |
i-out and E-out | raw output of current and potential |
power | 5 V-output (max. 150 mA) |
Other | |
electrode connections | 2 mm banana pins for RE, WE, CE and GND |
housing | 15 x 25 x 25 cm 3 |
weight | ~4 kg |
temperature range | 0 ºC ~ + 50 ºC |
power supply | external 12 V AC/DC adapter |
communication | USB-B |
internal storage space | 8 GB per channel |