본문 바로가기
주메뉴 바로가기
회사소개
About Qrins
약도
취급품목
장비별
악세서리류
메이커별
응용별
신제품 소개
자료실
메이커 자료실
FAQ
고객지원
Nesw&Event
Q&A
제품문의
검색
취급품목
Gateway to Electrochemistry
장비별
악세서리류
메이커별
응용별
신제품 소개
장비별
Quad Multi Function isoPod™ with USB
제품 번호 : EPU452
4개 채널로 구성, 4채널 각각 다른 신호 모니터링 가능
pH, temperature, conductivity, dissolved oxygen, biosensors recording
· 첨부파일
EPU452_Quad_Multi_Function_isoPod.pdf
LIST
General
Input connectors: 4, BNC.
Computer connection: USB, Type B socket. Cable supplied.
Isolation: > 250 Vrms independent on each channel.
Power: 500 mA @ 5 V DC. Mains adaptor supplied.
Dimensions:
170 x 130 x 35 mm.
Weight: ~800 g.
Voltmeter
Input impedance:
10
13
ohm.
Input ranges:
±2000 mV
.
pH & ISE
Input impedance:
> 10
12
ohm.
Input ranges:
±2000 mV (> pH 0 – 14), ±200 mV (pH 3.6 – 10.4).
Calibration:
Single or double point
(with Pod-Vu or MF Configurator software).
Conductivity
Input ranges:
200, 20, 2, 0.2, 0.02 and 0.002 mS.
Calibration:
Single point. Conductivity or TDS
.
RTD
Probe type: 1000 ohm platinum RTD.
Probe error: ±(0.10 + n/600) °C at n°C with
ET021 RTD probe.
Temperature range: –25 to +125°C.
Thermistor
Probe type:
30 kohm thermistor.
Dissolved Oxygen dO
2
Input ranges:
±2 mA, ±200, ±20, ±2 µA, ±200, ±20 nA.
Polarization:
0, then –500 to –1000 mV in 50 mV steps (with Pod-Vu or MF Configurator software).
Zero offset range:
±20 µA.
Typical RMS noise:
1 pA when sampling at 1/s.
Calibration:
Single or double point
(with Pod-Vu or MF Configurator software)
.
Biosensor
Input ranges:
±2 mA, ±200, ±20, ±2 µA, ±200, ±20 nA.
Polarization range:
±2000 mV in millivolt steps.
Zero offset range:
±20 µA.
Typical RMS noise:
1 pA when sampling at 1/s.
Calibration:
Single or double point
(with Pod-Vu or MF Configurator software)
.
LIST