취급품목
Gateway to Electrochemistry
Gateway to Electrochemistry
EIS Corrosion Package에 제공되는 EmStat4S HR Potentiostat/Galvanostat/EIS Analyzer는 연구 및 실험용으로 크기가 작은 (7.2 x 5.5 x 2.6 cm3) 휴대형 potentiostat입니다.
부식 속도를 결정하기 위해 최대 200 mA까지 사용할 수 있는 광범위한 전류 범위를 가지고 있으며 부식 분석에 사용되는 EIS 테크닉을 포함한 모든 일반적인 전기화학 테크닉을 제공합니다.
Potentiostatic Polarization, Linear Polarization, Cyclic Polarization, Corrosion Potential 측정 뿐만 아니라 Potentiostatic, Open Circuit Potential(EOC)을 측정합니다.
일반 | |
Potential range | ± 6 V |
Max. compliance voltage | ± 8 V |
Current ranges | 100 nA to 100 mA (7 ranges) |
Max. current | ± 200 mA |
Potentiostat | |
applied potential resolution | 183 μV |
applied potential accuracy | ≤ 0.2% ±1 mV offset |
current ranges | 100 nA to 100 mA (7 ranges)) |
measured current resolution | 0.009% of CR (92 fA on 1 nA range) |
measured current accuracy | ≤ 0.2% at Full Scale Range |
Galvanostat | |
current ranges | 1 uA, 100 uA, 10 mA, 100 mA (4 ranges) |
applied dc-current | ±3 * CR (current range) |
applied dc-current resolution | 0.0183% of CR) |
applied dc-current accuracy | <0.4% (gain) + 0.002 * CR (offset) |
measured dc-potential resolution | 193 μV (gain 1) |
measured dc-potential accuracy | ≤ 0.2% ±1 mV offset |
FRA / EIS | |
frequency range | 10 μHz to 200 kHz |
ac-amplitude range | 1 mV to 900 mV rms, or 2.5 V p-p |
measured current accuracy | ≤ 0.2% at Full Scale Range |
GEIS | |
frequency range | 10 μHz to 200 kHz |
ac-amplitude range | 0.9 * CR (Arms) |
Electrometer | |
electrometer amplifier input | > > 1 TΩ // 10 pF |
bandwidth | 10 kHz default or 500 kHz for EIS and fast CA/CP |
Corrosion Mode
PSTrace5 소프트웨어에는 부식 테크닉을 지원하는 Corrosion mode가 있습니다.
PSTrace5 소프트웨어는 Equivalent Circuit Fitting 기능을 지원합니다.