취급품목
Gateway to Electrochemistry
Gateway to Electrochemistry
Plus EIS Corrosion Package에 제공되는 PalmSens4는 USB 전원 또는 배터리로 구동되는 Potentiostat/Galvanostat/Electrochemical Impedance Spectroscopy (EIS) 분석기입니다.
PalmSens4는 높은 resolution과 낮은 noise로 큰 전압 범위(±5 V 또는 ±10 V)와 전류 범위(100 pA ~ 10 mA)를 가지고 있습니다.
기본 내장 배터리가 포함되어 있어 별도의 외부 전원 공급없이 사용 가능하며 블루투스가 내장되어 있어 Windows용 PSTrace 소프트웨어 뿐만 아니라 Android 용 PStouch app으로도 장비 제어가 가능합니다.
완벽한 실험용 장비로 휴대성이 간편하고 견고한 디자인으로 현장용 실험에 이상적인 장비입니다.
PalmSens4는 광범위한 corrosion analysis methods를 가능하게 합니다. Tafel slope, 부식 속도, 부식 전류를 얻기 위한 polarization curve는 전기
도금, 증착 필름 또는 강제 부식을 일으키기 위해 표면에 전류를 가합니다. 또한 0.1 μHz ~ 1 MHz의 EIS (Electrochemical Impedance Spectroscopy)를
수행할 수 있어 coating resistance, polarization resistance, pore resistance, coating capacitance, coating의 수분흡수 및 고장수명을 예측할 수 있습니다.
PalmSens4는 전압과 EIS 사양에 따라 아래 모델 번호로 분류됩니다.
| 전압 사양 ± 5V | 전압 사양 ± 10V |
EIS 최대 100 kHz [F1] | PS4.F1.05 | PS4.F1.10 |
EIS 최대 1 MHz [F2] | PS4.F2.05 | PS4.F2.10 |
PalmSens4 패키지 :
PalmSens4 Potentiostat/Galvanostat/EIS Analyzer에서 지원되는 테크닉은 다음과 같습니다.
고정 주파수 또는 주파수 스캔으로 스캔 할 수 있습니다.
General | |
dc-potential range | ± 5V or ± 10V |
compliance voltage | ± 10V |
maximum current | ± 30 mA (typical) |
max. acquisition rate | 150,000 data points/s |
Potentiostat (controlled potential mode) | |
applied dc-potential resolution | 76.3 μV (18-bit) |
lied potential accuracy | ≤ 0.1% ± 1 mV offset |
current ranges | 100 pA to 10 mA (9 ranges) |
current ranges | ≤ 0.1 % (at Full Scale Range) |
measured current resolution | 0.005 % of current range (18-bit, 5 fA on 100 pA range) |
Galvanostat (controlled current mode) | |
current ranges | 1 nA to 10 mA (8 ranges) |
applied dc-current range | ± 6 times applied current range |
dc-current resolution | 0.0076% of applied current range (<10 mA) |
measured dc-potential resolution | 78.13 μV at ±10 V (gain 1, 18-bit) |
measured dc-potential accuracy | ≤ 0.05% or ±1 mV (for |E| < ±9 V) |
FRA / EIS (impedance measurements) | |
frequency range | 10 μHz to 1 MHz (or 10 μHz to 100 kHz) |
ac-amplitude range | 1 mV to 0.25 V rms, or 0.7 V p-p |
GEIS (galvanostatic impedance measurements) | |
frequency range | 10 μHz to 100 kHz (or 10 μHz to 100 kHz) |
ac-amplitude range | 0.001 x CR to 0.4 x CR (<10 mA) |
Electrometer | |
electrometer amplifier input | > 1 TΩ // 10 pF |
bandwidth | 1 MHz |
Other | |
housing | aluminum with rubber sleeve: 15.7 x 9.7 x 3.5 cm3 |
weight | 500 g |
temperature range | 0 ºC ~ + 50 ºC |
power supply | USB or internal LiPo battery |
communication | USB and Bluetooth (Dual Mode) |
battery time | > 16 hours idle time |
|